AUTONET TV

Keeping Yourself in Suspension (Control Arm Assembly Replacement)

When you are pointing your vehicle straight down the street, it should go straight.  That’s pretty straightforward, right? Sometimes, though, you may notice you have to keep adjusting the steering wheel to keep going straight.  While that could be caused by many different issues, one possibility is that you have a failing or bent control arm.

Another sign is that when you brake, your vehicle pulls to one side or the other.  Sometimes your suspension may sound noisy, especially when you’re traveling on rough surfaces.  A damaged control arm may also make it almost impossible for you to get a good wheel alignment. 

The control arms are part of your suspension, and some vehicles have upper control arms and lower control arms.  Not all have the same number of control arms, but one thing is important: If you have worn bushings on your control arms or a worn-out ball joint, the control arm on the other side should also be replaced.  The rubber bushings are susceptible to damage from age and exposure to the elements, and ball joints usually shouldn’t be replaced separately. 

Any time you have a suspension issue, it’s important that a technician inspects the other parts of your suspension as well.  If one part of it is showing its age, it’s not unusual for other components to show similar wear.  

One other thing.  If you’ve had one of your control arms bent or damaged in an accident, you must have it replaced.  Your suspension is an important part of your vehicle’s safety and handling, so you should keep it in good operating condition.  After all, your life is riding on it, literally.   

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Bump in the Road (Alignment)

There's something you can do that helps your tires last longer, wear more evenly and your vehicle handle better.  "Sign me up," you say! Wondering what that is? It's aligning your wheels, and it will literally point you in the right direction when it comes to a better and safer driving experience.

When your vehicle was designed, the engineers made sure your tires were all pointing the same way by designing the suspension to make optimal contact with the road. That way the ride is smooth, you don't feel vibrations or shimmying and your vehicle travels in a straight line, without pulling to one side or the other.

Unfortunately, your vehicle is not brand new; time and distance take their toll.  After hitting countless bumps, potholes, or the occasional curb, your suspension gets knocked a little out of kilter.  Those precise angles the engineers planned on for your vehicle? They get out of whack

Uneven or premature tire wear is one of the first signs your alignment may be off.  If you are driving straight and your steering wheel isn't pointing straight, that's another indication alignment might need checking. Tire squealing can also be a clue.

When you bring your vehicle in for an alignment, we use equipment designed to measure the tilts and angles of your suspension's parts.  The technician will also check to see if any of the vehicle's suspension components are worn or broken.  We will also check your steering angle sensor to make sure it's set properly. 

The process is different for vehicles that are front-wheel drive, rear-wheel drive, all-wheel drive, or 4-wheel drive. 

After your alignment, your tires should wear more evenly, your steering should be straight and your wheels vibration-free.  If it's been a while since you've had your vehicle aligned, bring it in and we'll check it.  Usually, your alignment will be a little off after one or two years of driving, and it's wise to follow your vehicle manufacturer's recommendation for how often your model should be checked.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Timing is Everything (Timing Cover Replacement)

There’s an important part in your vehicle that shields your timing belt, timing chain or cam belt from the debris and gunk that can be kicked up from the road.  It’s called the timing cover.  It’s important because the timing belt or chain is what coordinates parts of your engine called the camshafts and crankshaft.  When they’re in sync, all runs smoothly.  When they’re not, it can cause some serious engine problems.

If your vehicle has a timing belt, without the protection of the timing cover, that belt can come loose from the timing gears or break.  If your vehicle has a timing chain, the cover keeps engine oil circulating around it which lubricates it.  When that starts to leak because of a bad gasket, the chain may not be getting adequate lubrication.  

If your vehicle has a timing cover problem, you may notice engine oil leaking if a gasket is not sealing tightly.  You may hear a strange metallic sound coming from the engine.  Another sign that timing is off is that you notice you’re losing power when you’re going up a hill. 

Usually, the timing cover will not wear out. But if you drive on roads where you’re getting a lot of debris and dirt kicked up into your engine compartment, the timing cover can get damaged and affect your vehicle’s operation.  It eventually could lead to engine problems, so if you notice any of the symptoms mentioned, have one of our technicians inspect your timing cover and gasket.  

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

U and your U-Joints (Lubricate U-Joints)

If your vehicle’s power goes to the rear wheels, then you have something called U-joints in the drivetrain. U-joints are connectors that allow the rotating power from your vehicle’s engine to deliver its power through a driveshaft to make the rear wheels rotate.  You need U-joints because the surfaces you drive on aren’t perfectly flat, and the driveshaft has to allow for some flexibility when you are traveling over uneven surfaces.

As you can imagine, the U-joints have to move and flex a lot as your vehicle is going down the road.  They have bearings in them to allow that flexibility, and those bearings are lubricated when your vehicle is made.  Some U-joints have lifetime lubrication and are not designed to be serviced.  When they fail, they have to be replaced.  Others have grease fittings on them that need periodic lubricating by a technician at intervals recommended by your vehicle’s manufacturer. 

There are signs you can look for that your U-joints need attention.  You may hear a clunk when the gears shift into drive or reverse.  You may feel your vehicle vibrate as you move down the road.  Other signs are leaks at the back of your transmission or a banging sound right before you lose power.  Sometimes, though, if you wait until you notice these symptoms, the U-joints may already be damaged.  

That’s why it’s important that your vehicle’s U-joints be periodically inspected and lubricated.  At the same time, a technician should thoroughly inspect the driveshaft and other connected components.  

Keep your U-joints in good shape, and both of U will continue to enjoy years of reliable transportation.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846