AUTONET TV

A Bright Spark (Ignition Coil Replacement)

Ever wonder how your vehicle’s engine is able to take the 12-volts from its battery and ramp that up to as high as the tens of thousands of volts it takes to fire its spark plugs? The secret is something called an ignition coil.  Most newer vehicles have an ignition coil at each cylinder, but older ones have a coil that serves all of the spark plugs. 

There are telltale signs that you have an ignition coil problem.  As you might expect, one symptom is it’s hard to start your engine or it won’t start at all.  If your engine is misfiring or not running smoothly or you see the Check Engine light come on, those all could point to an ignition coil failure.

Several things can contribute to ignition coil trouble in addition to normal wear and tear. Moisture and dirt may have gotten inside the coil, plus the heat and vibration of your engine over time can contribute to them going bad.  Bad spark plugs or plug wires can also be a cause.  

While ignition coils can last 100,000 miles/160,000 km, depending on how you drive and in what conditions.  If you start noticing some of the signs and symptoms just described, it’s a good idea to schedule a visit to see us so a technician can diagnose what’s wrong. Driving too long with an engine misfiring can damage your catalytic converter, and that can be expensive to replace.

A technician will thoroughly check your ignition system and determine where the failure is.  If it’s only one coil that’s bad, it may be the only thing that will need replacing.  If your vehicle has a distributor, it may also need to be replaced.  Properly-working ignition coils will help your vehicle operate at its best and help prevent future engine damage.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Out of Joint (CV Joint and Boot Replacement)

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.  

If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The biggest problems come when one of those rubber boots cracks.  Water and dirt can then get into the joint, causing it to wear down and lose all its vital lubrication.  It’s important to have your CV joints inspected regularly so a technician can spot cracks before the CV joints are ruined.  Sometimes just the boot can be replaced before any major damage is done.  But when the joint does go bad, it must be replaced.  

Signs your CV joint needs changing out? You might hear a clicking sound when you turn if the CV joint is worn out. You might notice some thick, black grease around your wheel or on the pavement where you park your vehicle.  You might also feel your vehicle vibrate when you’re going fast.

If you suspect you might have a bad CV joint, bring your vehicle in so a technician can determine what’s going on.  Keep your CV joints in good shape and reduce the risk of them seizing up at an inopportune time so you can avoid being stranded.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

Clean Machine (Fuel and Air Induction Cleaning)

As your vehicle ages, its performance isn’t quite what it used to be, but many of us never notice the change because it’s gradual.  So here are a few questions to ask yourself.  Does your vehicle feel like it doesn’t have the pep that it used to? Have you noticed your fuel economy isn’t quite as good as it once was? Does it idle roughly or is it hard to start?  Do you hear the engine knocking? Has it recently failed an emissions test?

All of those can be signs that your fuel and air induction systems are dirty and need cleaning.  Your fuel system takes gasoline from the tank to the engine’s combustion chambers where fuel injectors spray fuel that mixes with air and is ignited by spark plugs.  Black carbon deposits eventually can build up, obstructing fuel flow and diminishing your engine’s performance and fuel efficiency.

The air induction system is what allows air to go into the engine’s combustion chamber.  Getting the proper air flow is necessary for you to quickly start your vehicle, accelerate, and perform the way it should and idle smoothly when you’re standing still.  Like the fuel system, your air induction system can get blocked up with deposits and other contaminants.

A professional fuel and air induction cleaning can help restore your performance and fuel economy, especially when you are experiencing problems.  A technician will use specialized chemicals that can remove the carbon buildup.  In extreme cases, they will remove the fuel injectors and clean them with specialized tools.  

After cleaning, you may notice how much more pep your vehicle has and how smoothly it runs.  Keep your fuel and air induction systems clean and enjoy your vehicle’s performance improvements.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

A Clean Connection (Battery Cleaning)

A clean connection is a wonderful thing.  Think of a good cell phone signal or an airline connection with ample time and short distance to the next gate. Good connections are also important for your vehicle’s battery, and one secret to that is to make sure it’s periodically cleaned.

If it’s been a while since you have had any service to your battery, bring it in so we can inspect it for any corrosion that might have formed.  Corrosion on the battery terminals will affect the connection between the battery and your vehicle’s electrical system. The amount of corrosion you can expect can be influenced by such things as the kind of climate you live in (dry or humid, warm or cold), if there’s lots of salt on the roads and how old your battery is.  

We have tools and chemicals to safely remove the corrosion for an optimal electrical connection. In order to reduce the amount of corrosion re-forming on the battery, we’ll apply a special protective coating.  

It’s also important to have your battery tested, especially if it’s more than a few years old or hasn’t been tested in a while.  Our equipment can measure how well a battery holds a charge and how much more life you should expect from it. We can discuss when you might expect to buy a new one, since a battery is definitely the kind of thing you don’t want to have fail you when you’re least expecting it.

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846

The ?Man-Made? Engine Oil (Synthetic Oil Change)

If you own a newer vehicle, your vehicle’s manufacturer may require that it use synthetic oil instead of conventional oil.  Synthetic oils are more stable, don’t break down as easily, and provide better engine protection than conventional oil. All those things can prolong the life of your engine and help it run better.

Imagine the damage that could happen to your engine as it operates at high speeds and very hot temperatures.  Oil reduces the friction between the metal parts.  That’s why it’s important that it maintains its lubricating properties for a long time, which synthetic oil does better than conventional oil.  

Clean oil is better than dirty oil because it has fewer impurities.  Synthetic oil is purer because of how it’s formulated and manufactured.  Plus, as the outside temperatures change, the ability of oil to operate in those conditions is important.  
For example, the colder it gets, it’s important for oil to flow easily to retain its lubricating properties. How thick a fluid is changes in different temperatures, and that thickness is known as viscosity, Synthetic oils are better at maintaining their viscosity throughout temperature changes. 

It’s not only newer vehicles that can benefit from synthetic oil.  If you have an older vehicle, synthetic oil may offer superior lubricating than conventional.  Our technicians can advise you what’s the best oil for your vehicle and how often you need to change it, which may vary from the owner’s manual recommendations.  You might find you’re able to change your oil less frequently than you used to with conventional oil.  

Yes, synthetic oil is more expensive than conventional, so let us help you decide whether its advantages are worth the difference in price.  

Bauer Auto Service
14455 State Hwy 23
Cold Spring, MN 56320
320-685-8846